TECHNICAL DATA

Circular saw unit

Tenoning spindle

Profilig spindles

Glass stop recovery unit

Rotowood is a result of years of experience and innovation. It is an electronic working centre for the production of window frames with a capacity from 30 to 80 completely finished, both on the tenoning and profiling side,  window frames a day.

MANUAL LOADING OF THE PIECES ON THE PLIER

With this plier device, you can work 2 pieces at a time – this ensures the productivity of about 4 pieces every minute.
The plier, in the direction of the operator, ensures easy loading of the pieces.

AUTOMATIC LOADING OF THE PIECES FROM THE TENONING TO THE PROFILING SIDE

As long as the pieces enter the profiling side, the tenoning side loads the other 2 pieces, which are tenoned on both sides. This process
ensures quick work, a higher production capacity and a reduction of mistakes due to the automatic introduction of the pieces into the profiling side.

AUTOMATIC ROTATION OF 1 OR 2 PIECES

Automatic rotation of 1 or 2 pieces from 250 to 3200 mm, with the automatic introduction of the pieces in the profiling side.

MILLING WORKING “ARIA 4”
HANDLE HOLE WITH ONLY ONE PASSAGE
PLUG HOLES FOR TRANSOMS AND JAMBS

OBLIQUE TENONING OPERATIONS

With Rotowood you can make +/-60° tilted tenons, just recalling the pre-set-up program.

SQUARING OPERATIONS ON THE TENONING SIDE

Squaring of the top part of sashes in the tenoning side with the automatic introduction of the pieces into the profiling side. Enlarged fibroid table to support doors and windows of big dimensions.

TENONING CARRIAGE

The tenoning carriage slides on linear guides with rack drive. A brushless motor ensures the right interpolation to do workings on the pantograph.

LEFT SPINDLE WITH COUNTER GUIDE

With one or more left spindles you can obtain pieces already profiled on both sides, ready to be assembled.

CHARGING AND DISCHARGING TABLE

Table for the automatic unloading of the pieces so the operator can later assemble them.

TOOL CHANGE PANTOGRAPH

Tool stock of 12 stations to lodge drill bits and aggregates with angular trows for drilling and milling.

Possible operations:

• Glass stop beam cutting +/- 45°
• Keyholes cylinders drilling
• Seats, hinges double opening sash drilling
• Pins on transom and upright in three sides drillings

AUTOMATIC INTEGRATED TOOL CHANGE SYSTEM

Unlimited assisted number of workings
Remarkable reduction of the times to equipe tools
Tools servicing interventions possible during the working of the machine
Automatic change of counterwood