Characteristic data
TECHNICAL DATA
Cutting unit
| Motor power | 3 kW |
| RPM saw motor | 3000 |
| Circular saw blade Ø | 400 mm |
| Cutting height | 125 mm |
| Pneumatic set of the saw | 125 mm |
Tenoning shaft
| Quantity | 01 |
| Shaft diameter | 50 mm |
| Shaft lenght | 620 mm |
| Motor power | 7,5 kW |
| RPM shaft motor | 3200 |
| Max of tools Ø | 330 mm |
Profiling shafts
| Quantity | 02 |
| Shaft diameter | 50 mm |
| Shaft lenght | 320 mm |
| Motor power | 5,5 kW |
| RPM shaft motor | 6000 |
| Max of tools Ø | 240 mm |
| Base tools Ø | 110 – 140 mm |
Glass stop recovery unit
| Quantity | 01 |
| Glass stop recovery saw Ø | 200 mm |
| Motor power | 2,20 kW |
| RPM shaft motor | 6000 |
Fittings on request
| Additional tenoning shafts |
| Cutting height 150 mm |
| Enlarged table for squaring |
| Horizontal encoder controlled sets for saw |
| Electronic fence for the lenght of the wood |
| Additional profiling shafts |
| Hardware grooving unit |
| Automatic suction hoods |
| Electronic counterguide in profiling side |
| Lubricating of the profiling plane |
| Increased motors power |
| CE Safety Norms |
| Working of 2 pieces |
| Motorized return unit |
| Mechanic return unit |
| +/- 60° angle cut display |
| Additional glass stop units |
| Left profiling shaft |
FULL DESCRIPTION
Sintesi CNC angular centre machine is equipped with a 620 mm tenoning spindle, so that the customer can attach a higher number of tools.
CUTTING OPERATIONS
- The wooden piece is placed on the tenoning carriage and stopped by two vertical pneumatic wood holders
- Cutting saw with vertical pneumatic set from the top to the bottom to reduce noisy Tilted tenons: possibility to carry out tilted tenons by the +/- 60° inclination of the fence, without removing any part of the machine
- Tenoning shaft: counter-supported shaft with diameter 50 mm and length 620 mm. Vertical encoder controlled set; max. tool diameter 330 mm. Standard motor 7,5 kW; possibility to place up to 11 tools unit according to different thicknesses of the wood
PASSAGE INTO PROFILING SIDE
Automatic introduction of the piece from the tenoning side to the profiling one. The advantages of this automatic passage:
- Reduced movement of the piece for the operator: more safety in working phase and work less tiring
- Higher production: when the piece is inside of the profiling side, the operator can work other pieces in the tenoning part
- Avoided mistakes in introductions of the pieces
- Simple use of the machine and quickness in working processes
CALIBRATING OPERATIONS
Squaring of sashes in the tenoning side.
Squaring plus profiling of a sash into the tenoning side and automatic introduction of the piece into the profiling side.
DETAILS
- Adjustment of advancing system wheels speeds from 2 to 17 mt/min and adjustment of pneumatic pressure of wheels. Draft with quickly lifting for tool change and cleaning of the machine
- (Head and rear views): in the profiling side, it is possible to place horizontal units, completely computer-assisted, to realize small channels
- Possibility to install on the machine, two left profiling shafts with electronic counter-guide
DECIDE WHICH KIND OF MACHINE YOU WANT!
Decide which kind of working centre you want. From the basic models, you could obtain all the personalized outcomes you could imagine. As experts we can offer, a lot of solutions to make up your personal working centre: on every basic machine, it is possible to adjust any fitting you want.
SAOMAD - Sintesi
CNC Working Centre for Window Frames
Sintesi CNC angular centre machine is equipped with a 620 mm tenoning spindle, so that the customer can attach a higher number of tools.
CUTTING OPERATIONS
- The wooden piece is placed on the tenoning carriage and stopped by two vertical pneumatic wood holders
- Cutting saw with vertical pneumatic set from the top to the bottom to reduce noisy Tilted tenons: possibility to carry out tilted tenons by the +/- 60° inclination of the fence, without removing any part of the machine
- Tenoning shaft: counter-supported shaft with diameter 50 mm and length 620 mm. Vertical encoder controlled set; max. tool diameter 330 mm. Standard motor 7,5 kW; possibility to place up to 11 tools unit according to different thicknesses of the wood
PASSAGE INTO PROFILING SIDE
Automatic introduction of the piece from the tenoning side to the profiling one. The advantages of this automatic passage:
- Reduced movement of the piece for the operator: more safety in working phase and work less tiring
- Higher production: when the piece is inside of the profiling side, the operator can work other pieces in the tenoning part
- Avoided mistakes in introductions of the pieces
- Simple use of the machine and quickness in working processes
CALIBRATING OPERATIONS
Squaring of sashes in the tenoning side.
Squaring plus profiling of a sash into the tenoning side and automatic introduction of the piece into the profiling side.
DETAILS
- Adjustment of advancing system wheels speeds from 2 to 17 mt/min and adjustment of pneumatic pressure of wheels. Draft with quickly lifting for tool change and cleaning of the machine
- (Head and rear views): in the profiling side, it is possible to place horizontal units, completely computer-assisted, to realize small channels
- Possibility to install on the machine, two left profiling shafts with electronic counter-guide
DECIDE WHICH KIND OF MACHINE YOU WANT!
Decide which kind of working centre you want. From the basic models, you could obtain all the personalized outcomes you could imagine. As experts we can offer, a lot of solutions to make up your personal working centre: on every basic machine, it is possible to adjust any fitting you want.
WINDOWS
TENONING
PROFILING
Need Finance?
No problem with Pronto Financing
Purchase your next piece of machinery and spread the cost with Pronto.