Cutting parameters
Min. length of the cut edge: 1200 mm
Max. length of the cut offset: 2500mm
Max. thickness of the cut offset: 150mm
Max width of input material: 500mm
Max. width of the finished board: 150mm
Min. width of the finished board: 70mm
Diameter of vertical saws: 500mm
Diameter of horizontal saws: 425 mm
Motors:
Power of the right vertical engine: 6.0/6.5/7.5/9.2 kW
Power of the left vertical engine: 6.0/6.5/7.5/9.2 kW
Horizontal engine power: 16.2/20/23.8/35/43 kW
Rotational speed of vertical saws: 2850 rpm
Feed system:
Smooth feed speed*: 0-17 or 0-24 m/min
*depending on engines
Full description
WDPP-410 KBA called a multi-disc edging machine is used to process wooden edges with a semicircular cross-section into boards of the required thickness. In the first part of the machine, the material is edged on the sides thanks to the saws operating in a vertical position. Material processing in the second part of the machine allows you to obtain ready-made elements by operating the saws in a horizontal position. It is possible to extend the cutting length to 6000 mm.
WDPP-410 KBA called a multi-disc edging machine is used to process wooden edges with a semicircular cross-section into boards of the required thickness. In the first part of the machine, the material is edged on the sides thanks to the saws operating in a vertical position. Material processing in the second part of the machine allows you to obtain ready-made elements by operating the saws in a horizontal position. It is possible to extend the cutting length to 6000 mm.
