Technical Data
Technical data
FLS – Eco 170
| P A R A M E T E R | S T A N D A R D | O P T I O N* |
| Cut material length | 2 200 – 7 200 mm | – |
| Cut material width | 450 mm | up to 1 600 mm |
| Maximum cutting height | 170 mm | – |
| Cutting height adjustment | Electronic – seven-position switch | – |
| Circular saw blade | Ø 550 mm | Ø 500 mm |
| Blade mounting hole | Ø 80 mm | – |
| Quick-change of the saw blade “ProLock” | YES | – |
| Main motor | 11 kW | 15 kW |
| Spindle speed | 2 900 rpm | Frequency inverter |
| Smoothly adjustable cutting feed | 0 – 60 m/min. | – |
| Table working height | 850 mm | – |
| Minimum extraction speed | 30 m/s | – |
| Extraction connection throat | 2 x Ø 160 mm | – |
| Extraction volume | 4 300 m3/h | – |
| Laser 40mW | YES | – |
| Second Laser 40mW | – | YES |
| Thickness of protective slats 8 mm | YES | – |
| Material pressure 3,000 mm standard on the left | – | YES |
| Second material pressure (from cutting length 4,200 mm) | – | YES |
| Control via 7″ Touchscreen panel | YES | – |
| Stop positioning via joystick | YES | – |
| ABSOLUT program | YES | – |
| CHAIN + OPTIM program | – | YES |
| Start of cutting – Mobile pedal 2000 mm long | YES | – |
| Start of cutting – Pedal along the entire length of the machine | – | YES |
| Ball rollers | – | YES |
| Cross table with fixed stop | – | YES |
| Additional cross table | – | YES |
| Mobile cross table | – | YES |
| Temperature control of electrical distribution and control panel | – | YES |
| Electrical voltage/frequency connection | ~3×400 V/50 Hz | – |
| Minimum compressed air supply pressure | 0,6 Mpa | – |
| Air consumption | 30 l/cut | – |
| Maximum air consumption (depending on the number of cuts) | 240 l/min. | – |
* More can be found in the Optional Equipment tab.
Options
The FLS ECO ripsaw can be complemented or configured with a range of optional equipment. Here we list the basic possibilities, but if you have a different request or inquiry, we would be happy to discuss it with you.
Saw
More powerful motor – the saw can be equipped with a 15 kW motor.
Different diameter saw blade – optionally, the saw can be fitted with a 450 mm diameter saw blade.
Full-length foot pedal –in addition to the standard pedal, another option for initiating the cutting process.
Plastic lining of the cutting joint
Plastic cross plates on the input table
Material handling
Metal rollers – located between the wooden cross planks on the loading table. They facilitate the movement of material on the table.
Metal plates with ball bearings – positioned between the wooden cross panels on the loading table, easing the material’s movement.
Cutting conditions
Second upper pressure – ensures pressure on the material along its entire length. It is suitable from a length of the cut material starting from 4,200 mm.
Width of Cut Material – Can be up to 1,000 mm.
Material formatting
Basic cross table (fixed ruler at 90°)
Additional cross table
Mobile cross table
Special equipment
Expansion of programs with CHAIN and OPTIM modes
Heating of the electrical switchboard and control panel – necessary if the machine is located in unheated spaces.
STORI MANTEL - FLS Eco 170
Rip saw - 170mm cutting height
Safety First
The FLS longitudinal cutting technology is equipped with numerous safety features, allowing the operator to focus solely on the quality of the work without concerns for their health. This applies both during material positioning for cutting and throughout the cutting process, as well as when handling cut material. The machine complies with strict safety requirements derived from relevant EU regulations and directives.
Basic Equipment with Extraordinary Performance
Even with the basic equipment, FLS rip saws achieve exceptional results. Smooth regulation of the blade feed and lift ensures a clean cut and high cutting performance. The blade replacement is easy and, above all, secure, thanks to the quick-locking system “ProLock.” The saw carriage is equipped with guiding and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure and adjustable wooden stop secure a firm fixation of the material during cutting, eliminating unwanted movement.
Precision and Error-Free Operation for Higher Efficiency
FLS technology stands out with its quick and easy setup through ergonomically placed controls with a touchscreen panel. The values for cut widths can be entered manually or with the help of the basic “Absolut” program or optional “Chain” and “Optim” Programs. The cutting process is displayed on the material using a laser beam and then longitudinally guided by the sliding saw blade. Thanks to millimetre precision, you can maximise the yield from your material.
Invest Only in What You Need
It’s entirely up to you and your requirements. Tell us the parameters and characteristics of your material or the final product, and we will recommend precisely what meets your expectations and what you will use to the fullest, thanks to a wide range of standard and optional equipment.
Surprising Universal Applications
FLS saws can cut prisms, beams, boards, large-sized materials with live edge or straight edge. The input material can be ripped, trimmed, formatted, cut at an angle, and bevelled, grooved, or used to produce cuts and lamellas. The machine is ideal for manufacturers of parquet and solid furniture or staircases. The saw can also be used for cutting non-wood materials such as PUR/PIR panels, materials made of artificial substances, sandwich panels, aluminium, or cement-bonded chipboard.
Rely on Innovative Solutions
Störi Mantel’s long-standing experience in the development and production of one blade rip saws ensures their professional and modern processing. The use of quality materials, top-notch components, and innovative technical solutions shapes a product on which you can build your brand further, ensuring excellent product quality and customer and employee satisfaction.
Need Finance?
No problem with Pronto Financing
Purchase your next piece of machinery and spread the cost with Pronto.